Nevo - Home Automation for Beginners

Nevo

With IMAGE Z-WAVE modules, you can significantly expand the functionality of your Nevo remote control: control lighting systems, dimming such as with window blinds or shutters and much more with our Z-WAVE modules using the new Z-WAVE wireless standard.

They do not get any lighter, more comfortable or compacter than this! IMAGE Z-WAVE modules put the complete control of your living space in the palm of your hand.

Overview of IMAGE Z-WAVE Modules:

Schuko Plug-in Switch (with extra switch)
For switching devices of all kinds on and off that are plugged into a power outlet (floor lamps, electronics, heaters, coffee makers, other kitchen appliances, fans and much more). There are no limitations on the switching capacity or the type of device to be switched on or off.

The device uses 230 volts and needs no maintenance. You also do not need an electrician to install it.

Schuko Dimmer (with additional switch)
For dimming lights with light bulbs and high voltage or transformer low voltage halogen lamps that are plugged into a power outlet. Only lamps can be dimmed. It is not possible to dim energy saving lamps, NV halogen lamps with switching power supplies or neon lamps.

The device uses 230 volts and needs no maintenance. You also do not need an electrician to install it.

Schuko Dimmer
For dimming all types of lighting such as lamps with light bulbs, high voltage or low voltage halogen lamps with a transformer as well as with a switching power supply, and also dimmable energy saving lamps.
The device uses 230 volts and needs no maintenance. You also do not need an electrician to install it.

In-Wall Switches
For switching on or off all built in electronics with single phase connections like ceiling and wall lighting, motors, etc. It can be installed in walls, in suspended ceilings, behind facades or in lamp casings. The device uses 230 volts and needs no maintenance. There are no limitations on the switching capacity or the type of device to be switched on or off.
Only qualified electricians should carry out installation.

In-wall Dimmers
For dimming built-in lighting with light bulbs and high or low voltage halogen lamps. Only lamps can be dimmed. It is not possible to dim energy saving lamps or neon lamps. The device uses 230 volts and needs no maintenance.
Only qualified electricians should carry out installation.

Power Strip with 5 Schuko Outlets
Ideal for use in cabinets. It replaces the need for switching on and off manually and reduces the use of standby power. All types of electronics are able to be switched on and off. The device uses 230 volts and needs no maintenance.
You also do not need an electrician to install it.

Schuko Plug-in Switch with Current Measurement Function
For switching devices of all kinds on and off that are plugged into a power outlet (floor lamps, electronics, heaters, coffee makers, other kitchen appliances, fans and much more). There are no limitations on the switching capacity or the type of device to be switched on or off. The device uses 230 volts and needs no maintenance.
You also do not need an electrician to install it. In addition to its on-off switching capabilities, the device can measure the current energy consumption (in watts) as well as the accumulated energy consumption since installing the device (in kWh). (Nevo currently does not yet support displaying this function.)

In-wall Control System for Outdoor Window Blinds
For controlling 220 volt outdoor blinds for windows and doors. Replaces the manual operation via on-off switch. Can be installed in walls. The device uses 230 volts and needs no maintenance.
Only qualified electricians should carry out installation.

“Easy Motion” Motion Detector
A motion detector that also calculates brightness and temperature. (Testing for Nevo compatibility has not yet been undergone!) The motion detector's sensitivity can be adjusted electronically for a broader range.
The device is powered by three AA batteries that last for roughly two years. The charge of battery is conveyed wirelessly.

Wall Insert for Control System with Potential-free Inputs
The insert can release a z-wave switch pulse as an input with any wall switch, which can then switch other switches and dimmers on or off . In this way, a pre-existing wall switch can simply be converted into a z-wave controlling switch without having to replace the switch itself. The insert is only 9 mm long and fits into standard sized wall gaps behind normal switches. You do not need an electrician to install switches with this insert.
If the functionality of a pre-existing switch connected to a 230 volt grid is being expanded, a qualified electrician should be utilized. The insert can be powered by a lithium battery (CR2450) under normal use (10 times a day) for roughly two years.

NEVO – Top-Notch, User-Friendly Home Control
The name “Nevo” comes from the phrase “new evolution in home control” and is based on the company’s 18 years of experience manufacturing wireless remote controls. The newest generation of Nevo remote controls have been developed to making controlling all of your home theater components much easier. They enable existing components and installations to interact easily with the most modern systems such as home automation systems and digital media.
With Nevo you can use one single device to control everything. You control all available A/V equipment with the largest, most comprehensive IR code database in the world (online updates and manual entries are possible). The integrated wireless Internet module enables access to music, pictures and movies on the network!